Colorado Springs, CO

Commercial Radon Testing in Colorado Springs

Measuring a commercial building is not measuring a house with more detectors. Mechanical ventilation, separate HVAC zones, occupancy schedules and a much larger footprint all change where radon collects and how a valid measurement has to be designed. We test offices, schools, multifamily buildings and commercial property across El Paso County.

Interior radon pipe and fan installed in the corner of a utility room

Radon Measurement performed by Gheorghe Marc, Certified Radon Measurement Professional

Colorado radon licence RME.0000760 · NRPP certification 116099-RMP · verify on NRPP

What this service includes

Building assessment first

Foundation contact, HVAC zoning, occupancy patterns and ground-contact rooms, before any detector is placed.

Multi-zone detector placement

Ground-contact rooms sampled per zone rather than a single reading taken as representative of the building.

Measurement under normal operating conditions

Commercial buildings are measured with the HVAC running as it normally does, which is a different protocol from a closed house.

Zone-by-zone written reporting

Results interpreted per area, so mitigation can be scoped to the parts of the building that need it.

Who needs this service

  • Property managers and commercial landlords with ground-contact space
  • Schools, childcare and healthcare occupancies where people spend long hours
  • Buyers conducting due diligence on a commercial building

Why a building is not a large house

A house is measured under closed-house conditions with one detector in the lowest lived-in level. A commercial building is measured with the HVAC running as it normally does, because mechanical ventilation is part of how that building behaves — and switching it off would produce a number describing a building nobody occupies.

The other difference is zoning. A large slab does not produce one radon level; it produces a different level in each part, depending on soil contact, slab condition and which air handler serves the space. That is why every regularly occupied ground-contact room is a candidate for a detector, and why the count comes from a walkthrough rather than a formula over the phone.

Results interpreted per zone are what make a mitigation design affordable, because they show which parts of the slab actually need treatment. How commercial mitigation is then designed follows directly from them. Where the concern is chemical vapour rather than radon, vapor intrusion uses closely related methods. For a single-family property, residential testing is the simpler and cheaper route.

How it works

Simple, Fast, Professional Radon Service

A clear, low-stress process from your first call to a verified, working system.

  1. 1

    Schedule a free consultation

    Call or request a free consultation online. We'll set a time that works for you.

  2. 2

    Inspect the property

    We look at your foundation, basement, or building to understand how radon enters.

  3. 3

    Test or design the system

    We test your level and, if needed, plan a system suited to your property.

  4. 4

    Install the system

    Our work focuses on safe routing, tidy finishes, and a quiet, reliable system.

  5. 5

    Verify results & explain care

    We confirm the system is working and walk you through simple ongoing maintenance.

FAQ

Commercial Radon Testing FAQs

Answers to common questions about this service.

Residential testing uses closed-house conditions and normally one detector in the lowest lived-in level. Commercial testing follows the ANSI/AARST standards for large buildings: measurement under normal HVAC operation, multiple detectors placed by zone, and results interpreted per area rather than as one building-wide number.

It depends on the ground-contact floor area and how the building is zoned mechanically. Every ground-contact room that is regularly occupied is a candidate, which is why the count comes from a walkthrough rather than a formula over the phone.

Yes. Multifamily is measured by zone and by ground-contact unit, and the results usually drive a mitigation design that treats the slab in sections. We work with owners and property managers throughout El Paso County.
Reviews

What our customers say

Reviews left by real customers on Google.

Amazing super professionals . Definitely recommend to you guys !
Jaiden · via Trustpilot
I had a very good experience with AAmerican Radon Solution LLC. Scheduling the radon test was quick and easy, and the technician arrived right on time. They were extremely professional, polite, and respectful of my home. The process was clearly explained, and I received the detailed results super fast. I highly recommend their services to anyone looking for reliable radon testing!
Marian · via Trustpilot
Good prices and very clean and friendly
Romeo Budica · via Trustpilot
Excellent! Quality service. Contractor showed up on time and he was really professional. He comunicate all the requirements to us for a proper test. For me, who did this type ot tests countless times I was looking to see if he mentions all the requirements, and he did. This is the first time we are using AAmerican Radon Solution LLC and im very satisfied. I do recommend AAmerican Radon for their services.
Gabriel ples · via Trustpilot
Very kind explanation excellent work
Christin Mun · via Trustpilot

Read every review on Trustpilot

Ready for commercial radon testing?

Leave your info and we'll call you back, or call AAmerican Radon Solution LLC in Colorado Springs.