Colorado Springs, CO

Vapor Intrusion Mitigation

Radon is not the only thing that migrates out of the ground and into a building. Where soil or groundwater has been contaminated — by a historic fuel release, a dry cleaner, an industrial process — volatile chemical vapours travel the same route, through the same cracks, driven by the same pressure difference. The mitigation method is closely related, and so are the systems.

Radon fan mounted in an attic between the roof rafters with its electrical disconnect

Radon Mitigation performed by Gheorghe Marc, Certified Radon Mitigation Specialist

Colorado radon licence RMT.0000360 · NRPP certification 116070-RMS · verify on NRPP

What this service includes

Review of the environmental findings

We work from the consultant's assessment. Identifying the contaminant and its extent is their scope, not ours.

Sub-slab depressurization design

The same principle as radon mitigation: hold the space beneath the slab at lower pressure so vapour leaves by pipe rather than through the floor.

Vapour barrier installation

Chemically appropriate membrane where the design calls for a barrier as well as active depressurization.

Verification and ongoing monitoring points

Systems built so performance can be demonstrated over time, not just on the day of commissioning.

Who needs this service

  • Owners of sites with a known or suspected subsurface contaminant
  • Buyers whose Phase II environmental assessment flagged a vapour pathway
  • Developers building over a previously industrial or commercial site

The same pathway, a different contaminant

Vapor intrusion and radon are the same building-science problem wearing different clothes. A structure sits at slightly lower pressure than the ground beneath it, and whatever is in that ground as a gas gets drawn upward through cracks, joints and penetrations in the lowest level. With radon the gas is radiological and naturally occurring. With vapor intrusion it is chemical and it is there because something was spilled, stored or manufactured.

Because the pathway is the same, the control is the same: sub-slab depressurization, sealed penetrations, a vented system, sometimes a barrier membrane chosen for chemical compatibility rather than just moisture. The engineering that makes a commercial radon system work is the engineering that makes a vapour intrusion system work.

What is not the same is the scope of responsibility. Identifying a contaminant and delineating its extent is an environmental consultant's work, and their assessment is what a mitigation design is built from. We install, commission and verify the system that controls the pathway — and where the concern turns out to be ordinary soil gas after all, radon measurement is the cheaper place to start.

How it works

Simple, Fast, Professional Radon Service

A clear, low-stress process from your first call to a verified, working system.

  1. 1

    Schedule a free consultation

    Call or request a free consultation online. We'll set a time that works for you.

  2. 2

    Inspect the property

    We look at your foundation, basement, or building to understand how radon enters.

  3. 3

    Test or design the system

    We test your level and, if needed, plan a system suited to your property.

  4. 4

    Install the system

    Our work focuses on safe routing, tidy finishes, and a quiet, reliable system.

  5. 5

    Verify results & explain care

    We confirm the system is working and walk you through simple ongoing maintenance.

FAQ

Vapor Intrusion FAQs

Answers to common questions about this service.

The migration of volatile chemical vapours from contaminated soil or groundwater upward into the indoor air of a building above. The pathway and the driving force are the same as radon — a building at lower pressure than the ground beneath it — but the contaminant is chemical rather than radiological.

The engineering is closely related and often identical in form: sub-slab depressurization, sealed penetrations, a vented system. What differs is the contaminant, the regulatory context, the choice of barrier material where one is used, and the monitoring expected afterward.

No. Identifying and delineating a subsurface contaminant is the work of an environmental consultant, and their assessment is what a mitigation design is built from. We install and verify the system that controls the pathway.
Reviews

What our customers say

Reviews left by real customers on Google.

Amazing super professionals . Definitely recommend to you guys !
Jaiden · via Trustpilot
I had a very good experience with AAmerican Radon Solution LLC. Scheduling the radon test was quick and easy, and the technician arrived right on time. They were extremely professional, polite, and respectful of my home. The process was clearly explained, and I received the detailed results super fast. I highly recommend their services to anyone looking for reliable radon testing!
Marian · via Trustpilot
Good prices and very clean and friendly
Romeo Budica · via Trustpilot
Excellent! Quality service. Contractor showed up on time and he was really professional. He comunicate all the requirements to us for a proper test. For me, who did this type ot tests countless times I was looking to see if he mentions all the requirements, and he did. This is the first time we are using AAmerican Radon Solution LLC and im very satisfied. I do recommend AAmerican Radon for their services.
Gabriel ples · via Trustpilot
Very kind explanation excellent work
Christin Mun · via Trustpilot

Read every review on Trustpilot

Ready for vapor intrusion?

Leave your info and we'll call you back, or call AAmerican Radon Solution LLC in Colorado Springs.